Process: Laser Etching
Detailed Application View
Laser marking of the machined rubber/aluminum tube was accompished using a 10 Watt Fiber Laser Marking System. The marking on the tube had a long cycle time of 8.91 seconds. The rubber was marked slower to produce a deeper mark. The parts were marked using a 10 watt Fiber Laser Marking System.
Recommended Laser Systems: Hand Held Laser Marking System
The Hand Held Fiber Laser is a safe, state-of-the-art, Direct Parts Marking (DPM) alternative for Nd:YAG and Nd:YVO4 lasers (Lamp-pumped, Side-pumped Diode, and End-Pumped Diode). Components include a Q-Switched Ytterbium Fiber Laser with Scan Head, Industrial PC Controller, Power Supply, and Marking Software.
Direct Parts Marking, UID Marking, Date Codes, Bar Codes, Time Stamps and all other permanent marks on all non-movable parts and equipment for traceability and Code Compliance purposes. Fiber Laser Marking Kit
The i-Series Fiber Laser Marking Kit was specifically designed for maintenance-free OEM applications. It delivers a diffraction limited (M2<1.05) laser beam directly to the worksite via a metal sheathed single mode fiber cable.
These compact service-free lasers are designed to operate under high shock, vibration and dust conditions, with relatively high humidity and temperatures. They do not require routine replacement parts or materials. Wall-plug efficiencies up to 50% result in a compact size, reduced utilities, and trouble-free air cooling.
Fiber-to-fiber architecture means a robust, monolithic design with no optics to align or maintain, no mechanics to stabilize, and with the focusable power and high power densities needed for the most demanding applications. One cable connection makes it easy to integrate into any laser marking and engraving system.