Process: Laser Cutting
Detailed Application View
Blue leather with 3-mm thickness was marked and cut by a 10 watt CW CO2 laser with 3.75-inch focal length lens. The speed of 50 mm/sec was used for etching surface with one pass and the speed of 10 mm/sec was set for cutting through the sheet with three passes. Total cycle time for cutting and marking whole part took 6 min 40 sec. For reducing the cycle time, the higher power CO2 laser was recommended to be used in the application.
Technology: CW CO2 Laser
Wavelength: 10.6 um
Wattage: 300 Watt
Focal Length Lens: 3.75 inch
Recommended Laser Systems: CO2 Laser Cutting & Engraving Machine
The SBM 1200M laser cutting and laser engraving machine comes equipped with CO2 laser combining flying optics with a precision Direct Drive motion system. CO2 laser equipped system provides highly accurate cutting, welding, engraving and marking capabilities for multiple materials.
OEM Fiber Laser Marking Kit
The i-Series Fiber Laser was specifically designed for maintenance-free OEM Integration into conveyer lines. Fiber architecture means a robust, monolithic design with no optics to align or maintain, no mechanics to stabilize, and 50,000 of hours MTBF.
CO2 Laser - OEM Marking Kit
The Fantom SP laser Marking Kit is the most advanced and fastest Wave Guide CO2 laser marking system available today for integration into production lines, marking, perforating and pharmaceutical equipment.
The F30SP is air cooled, completely sealed, and maintenance free OEM product with PC based DSP controller, mounting hardware, and robust marking software with an easy-to-use graphical user interface.