Application Search:
START HERE!
Highlighted Application:


Application #311
Process: Laser Marking
Material: Stainless Steel


» Laser Engraving & Laser Marking » Laser Tower Series » LaserTower DESKTOP

LaserTower DESKTOP

The LaserTower™ DeskTop Marking and Engraving System is an economical industrial-grade material processing system designed for
low-profile flat marking applications and small size for tight workspace conditions. 

The LaserTower™ DeskTop is a low-cost industrial-grade Marking & Engraving System designed for low-profile flat marking applications.  
The unit is ideal for space sensitive workspace conditions incorporating a removable scissor jack lift platform.  

The LaserTower™ DeskTop is optimized for a Fiber Laser or Fantom
SLAB CO² Laser, Scan Head, Industrial PC Controller and Power Supply.

The LaserTower™ Desktop incorporates Fonon’s proprietary Software designed to specifically run on Windows 7 Operating systems.  The LaserTower™ DeskTop processes the largest range of materials in the industry with special attention to highly-reflective metal applications.

 

The LaserTower  Little-Giant produces a wide variety of Permanent, Legible, 
Non-Removable Marks on a  wide variety of materials. 

 Applications and Types of Marks

 Materials

ITO or Paint Removal 
Backlit Button Marking Medical/Automotive Coding
IC Chip Package Marking 
2D UDI/UID Barcoding 
Part Numbering
3D Engraving/Deep-Engraving
Surface Texturing 


 
  OCR Code Marking  
  “On-The-Fly” Marking
  Alphanumeric Marking 
  Logos
  Schematics
  Sequential Serial  
  Numbers
  Lot Codes
  Date Codes
  Ablation (Anodized,  
  Painted or Coated)

 
  Aluminum 
  (Anodized/Polished/Cast) 
  Stainless Steel
  Mild Steel
  Titanium
  Nickel 
  Copper
  Brass
  Carbide
  Polycarbonate
  Polypropylene 
 
  Painted Metal    
  Alloys Chrome
  Cast Iron
  Wood and Ceramics 
  Rubber and Silicon 
  Marble and Stone
  Composites and PVC
  Plastic and Graphite
  Fabrics and Leather
  Acrylic and MDF
  Galvanized Metals 
 

LaserTower™ Desktop Design: Main Features:

  • Maintenance-Free Direct Part Marking (DPM)
  • Continuous operation under high-shock, vibration and dust conditions
  • Long-term industrial-grade reliability with 50,000 hours MTBF
  • Optimized for either a Fiber or CO² Laser
  • Standard wall plug operation with high electrical efficiency
  • Low voltage power source (110/220 VAC) 8 amps
  • Laser “ON” magnetically locked front door for operator safety
  • Scissor Jack Lift Platform inside the processing chamber
  • Economical, low-cost system
  • Low height for space sensitive workspaces  
  • Class 1 or Class 4 Laser-Rated Safety Viewing Port
  • PC-Based Controller, Flat Panel Monitor, Mouse and Keyboard
  • Industrial-grade Extruded Frame with 19” Rack Mount Design
  • Exhaust outlet for Fume Extractor
  • Side Doors for longer parts (optional)

Software

Proprietary software is a high performance,  multi-threaded laser marking solution designed to specifically run on Windows 7 operating systems. 

 

 

  • Maintenance-Free Direct Part Marking (DPM)
  • Continuous operation under high-shock, vibration and dust conditions
  • Long-term industrial-grade reliability with 50,000 hours MTBF
  • Optimized for either a Fiber or CO² Laser
  • Standard wall plug operation with high electrical efficiency
  • Low voltage power source (110/220 VAC) 8 amps
  • Laser “ON” magnetically locked front door for operator safety
  • Scissor Jack Lift Platform inside the processing chamber
  • Economical, low-cost system
  • Low height for space sensitive workspaces  
  • Class 1 or Class 4 Laser-Rated Safety Viewing Port
  • PC-Based Controller, Flat Panel Monitor, Mouse and Keyboard
  • Industrial-grade Extruded Frame with 19” Rack Mount Design
  • Exhaust outlet for Fume Extractor
  • Side Doors for longer parts (optional)
 
System Specifications  
Laser Equipment  Fiber Laser: LPQ 20-1.0, LPQ 30-1.0 
CO² Laser – Fantom F30, Fantom F100
Mode of operation Q-Switched or CW (Fiber laser); Pulsed or CW (CO² laser)
System Dimensions See Diagram Representation
Weight 225 pounds
Maximum Material Weight 80 pounds
Operating Temperature +18 to +25o C
Relative Humidity 40 – 80% non-condensing
Electrical Requirements 120 volt 8 amps
Clean Dry Air* (If Required and equipped)* 80 PSI
 
 

Fiber laser

Fiber Lasers are a great leap forward in processing all metal and coated soft material applications. Our Fiber Lasers are easily integrated into industrial processes in comparison with conventional lasers due to:

  • State of the art, Air-cooled, Ytterbium Q-switched Fiber Laser up to 2mJ for marking on virtually any material 
  • CW or Q-switched Fiber laser options with high-repetition rate 
  • Excellent TEM00 beam quality (M2 < 1.05) 
  • Exceptional High Reliability with more than 30,000 hours estimated maintenance-free operation 
  • Very high 50,000 hours MTBF (100,000 hours typical on diodes) 
  • Flexible cable-beam delivery system 
  • No water cooling required 
  • Optimized for Direct Part Marking (DPM) applications including UDI/UID Barcoding and 3D Deep Engraving 
  • Red diode pointer for easy application setup 
  • Fiber delivery up to 5 meters 
  • Warranty – 2 years on laser components with 5 years optional program

CO2 Laser

Fonon Corporation’s proprietary Fantom CO² SLAB Lasers are a leap forward in laser technology. These CO² lasers are easily integrated into industrial processes in comparison with conventional lasers due to:

  • Designed to operate under high shock, vibration & dust conditions
  • Sealed off and RF Excited CO² SLAB laser
  • CW or Pulsed CO² laser options
  • Excellent TEM00 beam quality (M2 < 1.2)
  • Exceptional Reliability with more than 10,000 hours maintenance-free operation 
  • Sealed dust-proof design
  • No need for gas refill during the warranty period
  • Flexible cable-beam delivery system
  • No water cooling required
  • Optimized for Direct Part Marking (DPM) applications including UID/UDI barcoding and engraving
  • Red diode pointer for easy application setup (Optional)
  • Warranty – 2 years on laser components with 5 years optional program

Operations & Maintenance Manual (in English) includes:

  • Service Information  
  • General Description 
  • Laser Safety Manual  
  • Schematics (Appendix A)
  • Software Manual (Appendix B) 
  • Operation Description -  
  • I/O Description  
  • Troubleshoot Guide
  • Scan head manual 
  • Control Board Manual
 
  • ITO or Paint Removal 
  • Backlit Button Marking Medical/Automotive Coding
  • IC Chip Package Marking 
  • 2D UDI/UID Barcoding 
  • Part Numbering
  • 3D Engraving/Deep-Engraving
  • Surface Texturing  
  • OCR Code Marking  
  • “On-The-Fly” Marking
  • Alphanumeric Marking 
  • Logos
  • Schematics
  • Sequential Serial  
  • Numbers
  • Lot Codes
  • Date Codes
  • Ablation (Anodized,  
  • Painted or Coated)

Materials

  • Aluminum (Anodized/Polished/Cast) 
  • Stainless Steel
  • Mild Steel
  • Titanium
  • Nickel 
  • Copper
  • Brass
  • Carbide
  • Polycarbonate
  • Polypropylene 
  • Painted Metal    
  • Alloys Chrome
  • Cast Iron
  • Wood and Ceramics 
  • Rubber and Silicon 
  • Marble and Stone
  • Composites and PVC
  • Plastic and Graphite
  • Fabrics and Leather
  • Acrylic and MDF
  • Galvanized Metals 
 
 
 

Application Listing


Application #508
Process: Laser Etching
Material: Anodized

Application #170
Process: Laser Marking
Material: Steel

Application #299
Process: Laser Marking
Material: Steel

Application #371
Process: Laser Cutting
Material: Leather

Application #377
Process: Laser Marking
Material: Steel

Application #505
Process: Laser Engraving
Material: Aluminum

Laser Applications | Awards | Financing | International Offices | Our Customers | | FPD and SEMI | 3D Metal Printing | Laser Videos | Русский | Employment | Contact Us | Site Map

 Cutting
Engraving/Marking
3D Printing
Applications
Markets
Support
Fonon Company

The forerunner in developing hi-tech CO2 and fiber laser marking, 3D metal printing, laser cutting and laser engraving machines and equipment.

Copyright © 2017 Laser Photonics