Application Search:
START HERE!
Highlighted Application:


Application #146
Process: Medical Device Marking
Material: Stainless Steel


» Laser Engraving & Laser Marking » Laser Tower Series » LaserTower COMPACT

LaserTower COMPACT

The LaserTower™ Compact Marking and Engraving System is an agile industrial-grade material processing system that operates as a stand-alone system or easily integrates into a crowded I/O production line environment.

Fonon Corporation’s LaserTower™ Compact is an all purpose industrial-grade material processing system designed to perform under high-vibration, shock and dust conditions.

Each LaserTower™ Compact is optimized per our customer’s unique application.  The LaserTower™ Compact is designed with either a Fiber Laser or CO˛ Laser with wattages ranging from 20W to 100W. The LaserTower™ Compact  has a low-height profile for space sensitive workspaces.  All Direct Parts Marking (DPM), including UDI/UID barcodes, logos and engravings are permanent, legible and  non-removable across the largest range of materials in the industry.  

The LaserTower™ Compact incorporates Fonon’s proprietary Software designed to specifically run on Windows 7 Operating systems

The LaserTower™ Compact is an industrial-grade Marking & Engraving System incorporating a programmable 4” Z-axis for focal height adjustments with 2 optical X’Y’ axes and a portfolio of lens options that incrementally increases the range of the marking area from 2” x 2” to 9” x 9”. The LaserTower™ Compact is optimized for a Fiber Laser or Fantom SLAB CO˛ Laser, Scan Head, Industrial PC Controller and Power Supply.  The LaserTower™ Compact processes the largest range of materials in the industry with special attention to highly-reflective metal applications.

 
 

LaserTower™ Compact Design: Main Features:

  • Maintenance-Free Direct Part Marking (DPM)
  • Continuous operation under high-shock, vibration and dust conditions
  • Long-term industrial-grade reliability with 50,000 hours MTBF
  • Optimized for either a Fiber or CO˛ Laser
  • Standard wall plug operation with high electrical efficiency
  • Low voltage power source (110/220 VAC) 8 amps
  • Laser “ON” magnetically locked front door for operator safety
  • Compact design for space sensitive workspaces
  • Large chamber provides a 19” by 19” material working area
  • 4” Z-Axis Controller to accommodate a broad range of heights 
  • Class 1 or Class 4 Laser-Rated Safety Viewing Port
  • PC-Based Controller, Flat Panel Monitor, Mouse and Keyboard
  • Industrial-grade Extruded Frame with 19” Rack Mount Design
  • Exhaust outlet for Fume Extractor
  • Side Doors for longer parts (optional)

Software

Proprietary software is a high performance,  multi-threaded laser marking solution designed to specifically run on Windows 7 operating systems. 

The LaserTower Compact features:

The FiberTower XP Compact is capable of meeting your Direct-Part-Marking needs. Simply plug the compact system into any 110VAC outlet and you are in business producing high quality marks on production parts.

  • Maintenance-Free Direct Part Marking (DPM)
  • Continuous operation under high-shock, vibration and dust conditions
  • Long-term industrial-grade reliability with 50,000 hours MTBF
  • Optimized for either a Fiber or CO˛ Laser
  • Standard wall plug operation with high electrical efficiency
  • Low voltage power source (110/220 VAC) 8 amps
  • Laser “ON” magnetically locked front door for operator safety
  • Compact design for space sensitive workspaces
  • Large chamber provides a 19” by 19” material working area
  • 4” Z-Axis Controller to accommodate a broad range of heights 
  • Class 1 or Class 4 Laser-Rated Safety Viewing Port
  • PC-Based Controller, Flat Panel Monitor, Mouse and Keyboard
  • Industrial-grade Extruded Frame with 19” Rack Mount Design
  • Exhaust outlet for Fume Extractor
  • Side Doors for longer parts (optional)
System Specifications  
Laser Equipment  Fiber Laser: LPQ 20-1.0, LPQ 30-1.0
CO˛ Laser – Fantom F30, Fantom F100
Mode of operation Q-Switched or CW (Fiber laser); Pulsed or CW (CO˛ laser)
System Dimensions See Diagram Representation
Weight 285 pounds
Maximum Material Weight 80 pounds
Operating Temperature +18 to +25o C
Relative Humidity 40 – 80% non-condensing
Electrical Requirements 120 volt 8 amps
Clean Dry Air* (If Required and equipped)* 80 PSI
 

Fiber laser

Fiber Lasers are a great leap forward in processing all metal and coated soft material applications. Our Fiber Lasers are easily integrated into industrial processes in comparison with conventional lasers due to:

  • State of the art, Air-cooled, Ytterbium Q-switched Fiber Laser up to 2mJ for marking on virtually any material 
  • CW or Q-switched Fiber laser options with high-repetition rate 
  • Excellent TEM00 beam quality (M2 < 1.05) 
  • Exceptional High Reliability with more than 30,000 hours estimated maintenance-free operation 
  • Very high 50,000 hours MTBF (100,000 hours typical on diodes) 
  • Flexible cable-beam delivery system 
  • No water cooling required 
  • Optimized for Direct Part Marking (DPM) applications including UDI/UID Barcoding and 3D Deep Engraving 
  • Red diode pointer for easy application setup 
  • Fiber delivery up to 5 meters 
  • Warranty – 2 years on laser components with 5 years optional program

CO2 Laser

Fonon Corporation’s proprietary Fantom CO˛ SLAB Lasers are a leap forward in laser technology. These CO˛ lasers are easily integrated into industrial processes in comparison with conventional lasers due to:

  • Designed to operate under high shock, vibration & dust conditions
  • Sealed off and RF Excited CO˛ SLAB laser
  • CW or Pulsed CO˛ laser options
  • Excellent TEM00 beam quality (M2 < 1.2)
  • Exceptional Reliability with more than 10,000 hours maintenance-free operation 
  • Sealed dust-proof design
  • No need for gas refill during the warranty period
  • Flexible cable-beam delivery system
  • No water cooling required
  • Optimized for Direct Part Marking (DPM) applications including UID/UDI barcoding and engraving
  • Red diode pointer for easy application setup (Optional)
  • Warranty – 2 years on laser components with 5 years optional program

Operations & Maintenance Manual (in English) includes:

  • Service Information  
  • General Description 
  • Laser Safety Manual  
  • Schematics (Appendix A)
  • Software Manual (Appendix B) 
  • Operation Description -  
  • I/O Description  
  • Troubleshoot Guide
  • Scan head manual 
  • Control Board Manual
  • ITO or Paint Removal 
  • Backlit Button Marking Medical/Automotive Coding
  • IC Chip Package Marking 
  • 2D UDI/UID Barcoding 
  • Part Numbering
  • 3D Engraving/Deep-Engraving
  • Surface Texturing 
  • OCR Code Marking  
  • “On-The-Fly” Marking
  • Alphanumeric Marking 
  • Logos
  • Schematics
  • Sequential Serial  
  • Numbers
  • Lot Codes
  • Date Codes
  • Ablation (Anodized,  
  • Painted or Coated)
Videos

Application Listing


Application #193
Process: UID Marking
Material: Aluminum

Application #347
Process: Paint Removal
Material: Backlit Button

Application #222
Process: UID Marking
Material: Aluminum

Application #330
Process: Laser Marking
Material: Steel

Application #492
Process: Laser Etching
Material: Plastic

Application #549
Process: Laser Annealing
Material: Titanium

Laser Applications | Awards | HandHeld Laser | Financing | International Offices | Our Customers | Spanish Page | FPD and SEMI | 3D Metal Printing | Fiber Laser vs Mechanical Milling  | Laser Cleaning | Laser Videos | Русский | Employment | Contact Us | Site Map

 Cutting
Engraving/Marking
3D Printing
Applications
Markets
Support
Fonon Company

The forerunner in developing hi-tech CO2 and fiber laser marking, 3D metal printing, laser cutting and laser engraving machines and equipment.

Copyright © 2017 Laser Photonics