Application Search:
START HERE!
Highlighted Application:


Application #653
Process: Laser Cutting
Material: Steel


» Laser Engraving & Laser Marking » Laser Tower Series » LaserTowerPRO CM

LASERTOWER PRO CM

The LaserTowerPRO CM Marking and Engraving System is an industrial-grade next-generation material processing system supporting both circumferential marking (CM) and flat marking applications that operates as a stand-alone system or easily integrates into an I/O production line environment.  

Fonon Corporation’s LaserTowerPRO CM is the most flexible industrial-grade material processing system designed to perform under high-vibration, shock and dust conditions.
Each LaserTowerPRO CM is optimized per our customer’s unique application. The LaserTowerPRO CM is designed with either a Fiber Laser or CO² Laser with wattages ranging from 20W to 100W. The LaserTowerPRO CM provides an oversized enclosure, supporting both circumferential marking & flat marking applications. All Direct Parts Marking (DPM), including UDI/UID barcodes, logos and engravings are permanent, legible and non-removable across the largest range of materials in the industry. 

The LaserTowerPRO CM is an industrial-grade Marking & Engraving System incorporating a programmable 8” Z-axis for focal height adjustments with 2 optical X’Y’ axes and a portfolio of lens options that incrementally increases the range of the marking area from 2” x 2” to 12” x 12”. LaserTowerPRO CM incorporates a movable Rotary Indexer and is optimized for a Fiber Laser or Fantom SLAB CO² Laser, Scan Head, Industrial PC Controller and Power Supply. The LaserTowerPRO CM processes the largest range of materials in the industry with special attention to highly-reflective metal applications.  

 

HIGH TECH APPLICATIONS

The LaserTower  series produce a wide variety of Permanent, Legible,
Non-Removable Marks on a  wide variety of materials. 

 Applications and Types of Marks

 Materials

ITO or Paint Removal
Backlit Button Marking
Medical/Automotive coding 
IC Chip Package Marking
2D UDI/UID Barcoding
Part Numbering
3D Deep-Engraving
Surface Texturing
 


  OCR Code Marking
  “On-The-Fly” Marking 
  Alphanumeric marking
  Logos or schematics
  Sequential Serial        
  Numbers
  Lot Codes/
  Date Codes 
  Ablation (Anodized,    
  Painted or Coated

 
 Aluminum
 (Anodized/Polished/Cast)
 Stainless Steel/ Mild Steel
 Titanium and Nickel
 Copper and Brass
 Carbide
 Polycarbonate
 Polypropylene
 Painted Metal Alloys
 Chrome and Cast iron
 
 
  Wood and Ceramics
  Rubber
  Silicon
  Marble and Stone 
  Composites and PVC
  Plastic and Graphite
  Fabrics and Leather
  Acrylic and MDF
  Galvanized Metals
  and more!

 

 

  • Maintenance-Free Direct Part Marking (DPM)
  • Continuous operation under high-shock, vibration and dust conditions
  • Long-term industrial-grade reliability with 50,000 hours MTBF
  • Standard wall plug operation with high electrical efficiency
  • Low voltage power source (110/220 VAC) 8 amps
  • Laser “ON” magnetically locked front doors for operator safety
  • Oversized chamber provides working area for larger parts
  • Class 1 or Class 4 Laser-Rated Safety Viewing Port
  • PC-Based Controller, Flat Panel Monitor, Mouse and Keyboard
  • Industrial-grade Extruded Frame with 19” Rack Mount Design
  • Removable Rotary Motor for circumferential marking
  • Exhaust outlet for Fume Extractor
  • Side Doors for longer parts (optional)
  • 80 PSI Pneumatic activated front-sliding doors (optional)
System Specifications  
Maximum Material Size

Without Rotary Indexer:  
[787 mm (W) x 482 mm (D) x 254 mm (H)]
[31 inches (W) x 19 inches (D) x 10 inches (H)] 

With Rotary Indexer:      
[482 mm (W) x 482 mm (D) x 203 mm (H)]
[19 inches (W) x 19 inches (D) x 8 inches (H)] 

Laser Equipment  Fiber Laser: LPQ 20-1.0, LPQ 30-1.0, LPQ 50-1.0, 
CO² Laser – Fantom F30, Fantom F100
Mode of operation Q-Switched or CW (Fiber laser); Pulsed or CW (CO² laser)
Programmable Z-Axis 4” or 8” Travel
System Dimensions See Diagram Representation
Weight 370 pounds
Maximum Material Weight 120 pounds
Operating Temperature +18 to +25o C
Relative Humidity 40 – 80% non-condensing
Electrical Requirements 120 volt 8 amps
Clean Dry Air* (If Required and equipped)* 80 PSI
 

 

Fiber laser

Fiber Lasers are a great leap forward in processing all metal and coated soft material applications. Our Fiber Lasers are easily integrated into industrial processes in comparison with conventional lasers due to: 

  • State of the art, Air-cooled, Ytterbium Q-switched Fiber Laser up to 2mJ for marking on virtually any material 
  • CW or Q-switched Fiber laser options with high-repetition rate 
  • Excellent TEM00 beam quality (M2 < 1.05) 
  • Exceptional High Reliability with more than 30,000 hours estimated maintenance-free operation 
  • Very high 50,000 hours MTBF (100,000 hours typical on diodes) 
  • Flexible cable-beam delivery system 
  • No water cooling required 
  • Optimized for Direct Part Marking (DPM) applications including UDI/UID Barcoding and 3D Deep Engraving 
  • Red diode pointer for easy application setup 
  • Fiber delivery up to 5 meters 
  • Warranty – 2 years on laser components with 5 years optional program 

CO2 laser

Fonon Corporation’s proprietary Fantom CO² SLAB Lasers are a leap forward in laser technology. These CO² lasers are easily integrated into industrial processes in comparison with conventional lasers due to:

  • Designed to operate under high shock, vibration & dust conditions
  • Sealed off and RF Excited CO² SLAB laser
  • CW or Pulsed CO² laser options
  • Excellent TEM00 beam quality (M2 < 1.2)
  • Exceptional Reliability with more than 10,000 hours maintenance-free operation 
  • Sealed dust-proof design
  • No need for gas refill during the warranty period
  • Flexible cable-beam delivery system
  • No water cooling required
  • Optimized for Direct Part Marking (DPM) applications including UID/UDI barcoding and engraving
  • Red diode pointer for easy application setup (Optional)
  • Warranty – 2 years on laser components with 5 years optional program

Operations & Maintenance Manual (in English) includes:

  • Service Information  
  • General Description 
  • Laser Safety Manual  
  • Schematics (Appendix A)
  • Software Manual (Appendix B) 
  • Operation Description -  
  • I/O Description  
  • Troubleshoot Guide
  • Scan head manual 
  • Control Board Manual
  • ITO or Paint Removal
  • Backlit Button Marking
  • Medical/Automotive coding 
  • IC Chip Package Marking
  • 2D UDI/UID Barcoding
  • Part Numbering/etching
  • 3D Deep-Engraving
  • Surface Texturing
  • OCR Code Marking
  • “On-The-Fly” Marking 
  • Alphanumeric marking
  • Logos or schematics
  • Sequential Serial Numbers
  • Lot Codes
  • Date Codes 
  • Ablation (Anodized,    
  • Painted or Coated
Materials
  • Aluminum (Anodized/Polished/Cast)
  • Stainless Steel/ Mild Steel
  • Titanium
  • Copper/Brass/Nickel
  • Carbide/Polycarbonate
  • Polypropylene
  • Painted Metal Alloys
  • Chrome and Cast iron
  • Wood and Ceramics
  • Ceramics
  • Rubber and Silicon
  • Marble and Stone 
  • Composites and PVC
  • Plastic and Graphite
  • Fabrics and Leather
  • Acrylic and MDF
  • Galvanized Metals and more!

 
 

For more information on our full range of laser marking and cutting solutions, please email us at .

 

Application Listing


Application #181
Process: Laser Annealing
Material: Tool Steel

Application #102
Process: Laser Marking
Material: Ceramics

Application #441
Process: Laser Etching
Material: Steel

Application #480
Process: Plastics Marking
Material: Plastic

Application #616
Process: Laser Marking
Material: Carbide

Application #681
Process: Laser Annealing
Material: Steel

Laser Applications | Awards | Financing | International Offices | Our Customers | | FPD and SEMI | 3D Metal Printing | Laser Videos | Русский | Employment | Contact Us | Site Map

 Cutting
Engraving/Marking
3D Printing
Applications
Markets
Support
Fonon Company

The forerunner in developing hi-tech CO2 and fiber laser marking, 3D metal printing, laser cutting and laser engraving machines and equipment.

Copyright © 2017 Laser Photonics