Application Search:
Highlighted Application:

Application #427
Process: Parts Marking
Material: Aluminum

» Laser Engraving & Laser Marking » Laser Tower Series » LaserTowerPRO RT


The LaserTowerPRO Round Table (RT) Marking and Engraving System is an industrial-grade material processing system engineered to operate in a continuous production environment.

Fonon Corporation’s LaserTowerPRO RT is a industrial-grade material processing system designed to perform under high-vibration, shock and dust conditions.
Each LaserTowerPRO RT is optimized per our customer’s unique application.  The LaserTowerPRO RT is designed with either a Fiber Laser or CO² Laser with wattages ranging from 20W to 100W.  The LaserTowerPRO RT incorporates a 24” rotary dial table for continuous loading/unloading in a uninterrupted manufacturing environment. All Direct Parts Marking (DPM), including UDI/UID barcodes, logos and engravings are permanent, legible and non-removable across the largest range of materials in the industry.  

The LaserTowerPRO RT is an industrial-grade, 3D Marking & Engraving System incorporating a programmable 8” Z-axis for focal height adjustments with 2 optical X’Y’ axes and a portfolio of lens options that incrementally increases the range of the marking area from 2” x 2” to 12” x 12”. The LaserTowerPRO RT incorporates a 24” rotary dial table for continuous loading/unloading during operation.  Each system is optimized for a Fiber Laser or Fantom SLAB CO² Laser, Scan Head, Industrial PC Controller and Power Supply. The LaserTowerPRO RT incorporates incorporates Fonon’s proprietary Software designed to specifically run on Windows 7 Operating systems  

The LaserTowerPRO RT processes the largest range of materials in the industry with special attention to highly-reflective metal applications.


Proprietary software is a high performance,  multi-threaded laser marking solution designed to specifically run on Windows 7 operating systems. 



  • Maintenance-Free Direct Part Marking (DPM)
  • Continuous operation under high-shock, vibration and dust conditions
  • Long-term industrial-grade reliability with 50,000 hours MTBF
  • Standard wall plug operation with high electrical efficiency
  • Low voltage power source (110/220 VAC) 8 amps
  • Laser “ON” magnetically locked front doors for operator safety
  • 24” Rotary Dial Table for continuous uninterrupted production
  • Class 1 or Class 4 Laser-Rated Safety Viewing Port
  • PC-Based Controller, Flat Panel Monitor, Mouse and Keyboard
  • Industrial-grade Extruded Frame with 19” Rack Mount Design
  • Exhaust outlet for Fume Extractor
  • Side Doors for longer parts (optional)
  • 80 PSI Pneumatic activated front-sliding doors (optional)


System Specifications  
Laser Equipment  Fiber Laser: LPQ 20-1.0, LPQ 30-1.0, LPQ 50-1.0, 
CO² Laser – Fantom F30, Fantom F100
Mode of operation Q-Switched or CW (Fiber laser); Pulsed or CW (CO² laser)
Programmable Z-Axis 4” or 8” Travel
Rotary Indexer 3’, 4” or 5” Chucks
System Dimensions See Diagram Representation
Weight 375 pounds
Maximum Material Weight 120 pounds
Operating Temperature +18 to +25o C
Relative Humidity 40 – 80% non-condensing
Electrical Requirements 120 volt 8 amps
Clean Dry Air* (If Required and equipped)* 80 PSI


Fiber laser

Fiber Lasers are a great leap forward in processing all metal and coated soft material applications. Our Fiber Lasers are easily integrated into industrial processes in comparison with conventional lasers due to:

  • State of the art, Air-cooled, Ytterbium Q-switched Fiber Laser up to 2mJ for marking on virtually any material 
  • CW or Q-switched Fiber laser options with high-repetition rate 
  • Excellent TEM00 beam quality (M2 < 1.05) 
  • Exceptional High Reliability with more than 30,000 hours estimated maintenance-free operation 
  • Very high 50,000 hours MTBF (100,000 hours typical on diodes) 
  • Flexible cable-beam delivery system 
  • No water cooling required 
  • Optimized for Direct Part Marking (DPM) applications including UDI/UID Barcoding and 3D Deep Engraving 
  • Red diode pointer for easy application setup 
  • Fiber delivery up to 5 meters 
  • Warranty – 2 years on laser components with 5 years optional program

CO2 laser

Fonon Corporation’s proprietary Fantom CO² SLAB Lasers are a leap forward in laser technology. These CO² lasers are easily integrated into industrial processes in comparison with conventional lasers due to:

  • Designed to operate under high shock, vibration & dust conditions
  • Sealed off and RF Excited CO² SLAB laser
  • CW or Pulsed CO² laser options
  • Excellent TEM00 beam quality (M2 < 1.2)
  • Exceptional Reliability with more than 10,000 hours maintenance-free operation 
  • Sealed dust-proof design
  • No need for gas refill during the warranty period
  • Flexible cable-beam delivery system
  • No water cooling required
  • Optimized for Direct Part Marking (DPM) applications including UID/UDI barcoding and engraving
  • Red diode pointer for easy application setup (Optional)
  • Warranty – 2 years on laser components with 5 years optional program

Operations & Maintenance Manual (in English) includes:

  • Service Information  
  • General Description 
  • Laser Safety Manual  
  • Schematics (Appendix A)
  • Software Manual (Appendix B) 
  • Operation Description -  
  • I/O Description  
  • Troubleshoot Guide
  • Scan head manual 
  • Control Board Manual
  • ITO or Paint Removal
  • Backlit Button Marking
  • Medical/Automotive coding 
  • IC Chip Package Marking
  • 2D UDI/UID Barcoding
  • Part Numbering/etching
  • 3D Deep-Engraving
  • Surface Texturing
  • OCR Code Marking
  • “On-The-Fly” Marking 
  •  Alphanumeric marking
  • Logos or schematics
  • Sequential Serial        
  • Numbers
  • Lot Codes/Date Codes 
  • Ablation (Anodized, Painted or Coated
  • Aluminum (Anodized/Polished/Cast)
  • Stainless Steel/ Mild Steel
  • Titanium
  • Copper/Brass/Nickel
  • Carbide/Polycarbonate
  • Polypropylene
  • Painted Metal Alloys
  • Chrome and Cast iron
  • Wood and Ceramics
  • Ceramics
  • Rubber and Silicon
  • Marble and Stone 
  • Composites and PVC
  • Plastic and Graphite
  • Fabrics and Leather
  • Acrylic and MDF
  • Galvanized Metals
  • and more!


For more information on our full range of laser marking and cutting solutions, please email us at .


Application Listing

Application #130
Process: Medical Device Marking
Material: Stainless Steel

Application #365
Process: Laser Marking
Material: Tool Steel

Application #530
Process: Laser Marking
Material: ID Tags

Application #586
Process: Laser Marking
Material: Steel

Application #591
Process: Laser Marking
Material: Steel

Application #635
Process: Laser Etching
Material: Steel

Laser Applications | Awards | HandHeld Laser | Financing | International Offices | Our Customers | Spanish Page | FPD and SEMI | 3D Metal Printing | Fiber Laser vs Mechanical Milling  | Laser Cleaning | Laser Videos | Русский | Employment | Contact Us | Site Map

3D Printing
Fonon Company

The forerunner in developing hi-tech CO2 and fiber laser marking, 3D metal printing, laser cutting and laser engraving machines and equipment.

Copyright © 2017 Laser Photonics