Laser engraving of this wooden block sample was done using a 100-watt CO2 laser through a 300mm lens.
Sample Name: | wood brick | Working Distance: | 220mm |
Material: | wood | Power: | 60%-98% |
Method Used: | Laser Engraving | Frequency: | 5 kHz |
Depth: | >.001 | Speed: | 5-20 inches per second |
Laser Type: | 100 watt CO2 | Passes: | 1-2 passes |
Focal Length Lens: | 300mm | Cycle Time: | 1.8 – 6.6 seconds |