by Dmitriy Nikitin | Aug 8, 2016 | Applications
Material: Foam Method Used: Cutting Depth: Kiss & (Through) Laser Type: CO2 Focal Length Lens: 3.75″ Power: 40 Watts (60 Watts) Frequency: 3 kHz (3 kHz) Modulated Speed: 300mm (300mm) Passes: 1 The samples were...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Application Details The Application was done with a low power system in the lab. The recommendation for this process would be for a minimum of 100watt laser for projected cutting speeds of 1mm per second. 100-watt laser projected 50mm plus per second.200-watt laser...
by Editorial Team | Aug 8, 2016 | Applications
Material: Acrylic with protection tape Method Used: laser cut Depth: Through Laser Type: 250W CW CO2 laser Focal Length Lens: 5′ Power: 100% (250W average) Frequency: 10kHz modulated Speed: 250mm/sec Passes: 1 Sample...
by Editorial Team | Aug 8, 2016 | Applications
Material: Cardboard Method Used: Laser Cutting Depth: Through Laser Type: CO2 Focal Length Lens: 5″ Power: 200 Watts Frequency: 1-10 kHz (Modulated) Speed: 20-50mm Passes: 1 The samples were cut using the SBM 1200FL cutting system equipped with a 250 Watt...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Material: Stainless steel Power: 80% Method Used: laser annealing Frequency: 55kHz Depth: Surface Speed: 400mm/sec Laser Type: Pulsed fiber laser (1064nm, 1mJ @ 20kHz) Passes: 3 Focal Length Lens: 160mm...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
Material: Steel Power: 100% Method Used: Laser annealing Frequency: 55kHz Depth: Surface Speed: 300mm/sec Laser Type: Pulsed fiber laser (1064nm, 1mJ @ 20kHz) Passes: 2 Focal Length Lens: 100mm...
