by Dmitriy Nikitin | Aug 8, 2016 | Applications
A laser marking on Aluminum
by Dmitriy Nikitin | Aug 8, 2016 | Applications
This anodized aluminum tube was marked with a 20 watt q-switched ytterbium fiber laser at 9 watts with a frequency of 25kHz and 160mm focal length lens. The part was surfaced etched to remove the anodized layer to create the mark. The mark was created at 30 inches per...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The part was marked using a 20 Watt Fiber Laser Marking System
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The part was marked with a 20-watt Q-switched Ytterbium fiber laser and a 160 mm focal length lens. The sample was ablated with the information provided by the customer to create a nice contrast mark. The sample was marked with an alphanumeric character and a line...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The samples were marked using a 20 watt Q-switched Fiber Laser using a 160 mm lens. The Colt logo (vector graphic) was annealed using 15 Watts of power, frequency of 80 kHz, speed of 5″ per second, resulting in a cycle time of 8.65 seconds. The FBI logo (raster...
by Dmitriy Nikitin | Aug 8, 2016 | Applications
The parts were marked with a 20 watt q-switched ytterbium fiber laser and 160 mm focal length lens. Process Parameters: Material: Steel Power: 16 Watts Method used: Ablation Frequency: 80 kHz Depth: Surface Speed: 10 inch/sec Laser Type: Q-Switched Fiber Laser Focal...
